glass to glass fixing non-hold 180 degree hydraulic hinge

Features

1.Glass to glass fixing 180˚

2.Suitable for 10-15mm tempered glass use

3.Maximum door leaf weight: 65kg

4.Maximum door leaf width: 1000mm

5.Self-closing at any door open angle

6.Double action, maximum door open angle: 95˚

7.Non-hold configuration

8.Valve adjustment available for closing speed control

9.Self-positioned when door reaches to initial position

10.Tested according to EN1154 (100,000 cycles)

Note:

Each pair of Applause Glass Hinge consists of one damping hinge and one

Closing hinge, only damping hinge is adjustable at closing speed.

To ensure the best performance, Damping Hinge should always

Be installed below the Closing Hinge. 

Precaution: Be careful not to loosen off the adjustment screw too far as this will render the hinge inoperable.

Warranties will also be void if screw is loosened too far.