Glass Hinge

1. Attach the self-closing hinge with the hinge body on the outside.
2. Attach the male section of the gate latch to the gate.
3. Place timber packers for the glass gate to sit on while attaching the gate locks and hinges.
4. Attach the hinges to the hinging panel, which has pre-drilled hinge holes to fix your frameless glass gate hinge to. Position the glass gate so the holes in the hinges line up with the holes in the hinge panel and attach.
5. Attach the female section of the pool gate latch to the latching panel or wall or round post.
6. Apply tension packer between the glass and gate latch with the double sided tape against the glass, then tighten the grub screws on the latch. Or just screws to wall/ post.
7. Tension frameless glass fencing gate by using the hinge pin rotating the hinge barrel and re-positioning the small pin in the required hole making sure you tension both hinges.
8. Test the pool fencing gate to ensure it closes from all positions, including only slightly open.